- 1100 GPM at BEP
- 98’ Head Shut-Off
- Peak Efficiency 79%
- ANSI/ASME - B73lean
- Highly Corrosion Resistant Proprietary FRP Formulation
PRODUCT DOWNLOADS:
GENESYS 6X4-11 DATA SHEET (60HZ, IMPERIAL) GENESYS 6X4-11 DATA SHEET (50HZ, METRIC)
The GENESYS® 6x4-11 vinyl ester and polyester end-suction centrifugal pump line is designed and engineered to provide highly efficient pumping solutions. The fiberglass reinforced polymer case construction with the option of no wetted metal parts gives it compatibility with many aggressive chemistries and corrosive fluids. The unique enclosed-impeller and time-tested volute design render 1800 RPM performances at 79% efficiency.
PRODUCT DOWNLOADS: GENESYS 6X4-11 DATA SHEET (60HZ, IMPERIAL) GENESYS 6X4-11 DATA SHEET (50HZ, METRIC)
The MDM Sequence® Colossus 750 DC+ pump delivers 120 GPM with controllable speed, enabling both direct and remote IoT control. Featuring Colossus impeller technology, it increases flow by 16% compared to legacy designs. With single-phase power and DC motor efficiency, it meets the demand for high flow and low energy consumption in a small footprint.- Speed Control
- Energy Efficiency
- High Flow
- IoT Compatible
- Low Energy Consumption
- Small form factor
PRODUCT DOWNLOADS: SEQUENCE® COLOSSUS 750 DC+ PRODUCT BROCHURE (GPM) SEQUENCE® COLOSSUS 750 DC+ PRODUCT BROCHURE (GPH) SEQUENCE® COLOSSUS 750 DC+ PRODUCT BROCHURE (METRIC)
Our light duty WW model strainers are sold with either a 1.5” or 2” union adapter. All units come complete with an internal strainer assembly and gasket seals. WW model strainers are designed, engineered, and produced in the USA.
PRODUCT DOWNLOADS: VALUFLO BASKET STRAINER (WW) PARTS SHEET VALUFLO PRODUCT BROCHURE
Our medium-duty PF model strainers have a clear or gray PVC body and a basket made of stainless steel or acrylonitrile butadiene styrene (ABS). The standard port dimension is a 2” male thread that comes with adaptors that have a slip port. You can expect higher quality molding processing, finer materials, and excellent performance.
PRODUCT DOWNLOADS: VALUFLO BASKET STRAINER (PF) PARTS SHEET VALUFLO PRODUCT BROCHURE
We offer two different sizes of swing check valves (1.5” and 2”) for our ValuFlo line of pumps. They are best suited for applications with potential flow reversal. All units are made from 100% PVC with a rubber sealed flapper swing valve.
PRODUCT DOWNLOADS: VALUFLO SWING CHECK VALVE DATA SHEET VALUFLO PRODUCT BROCHURE-
We offer three different sizes of swing check valves (1.5” to 3”) for applications with potential flow reversal. All units are made from 100% PVC with a rubber sealed flapper swing valve.
PRODUCT DOWNLOADS: ADVANCE SWING CHECK VALVE DATA SHEET ADVANCE PRODUCT BROCHURE 
Our heavy-duty FT model strainer is constructed of FRP, PVC, and 316SS. These materials result in a product that is extremely corrosion resistant and built to last the life of any project. The standard basket is 18 Gauge 316SS, constructed with 1/8” holes perforated on 3/16” staggered centers. Baskets can be fabricated with a variety of hole sizes and open areas to meet varying design requirements. The Genesys Basket Strainer (FT) offers greater temperature resistance and chemical compatibility than traditional iron, steel, and bronze strainers.
PRODUCT DOWNLOADS GENESYS BASKET STRAINER (FT) PARTS SHEET- Our medium-duty PF model strainers have a clear or gray PVC body and a basket made of stainless steel or acrylonitrile butadiene styrene (ABS). The standard port dimension is a 2” male thread that comes with adaptors that have a slip port. You can expect higher quality molding processing, finer materials, and excellent performance.
PRODUCT DOWNLOADS -
Our heavy-duty FT model strainers are constructed of FRP, PVC, and 316SS. These materials result in a product that is extremely corrosion resistant and built to last the life of any project. The standard basket is 18 Gauge 316SS, constructed with 1/8” holes perforated on 3/16” staggered centers. Baskets can be fabricated with a variety of hole sizes and open areas to meet varying design requirements. The C•Shell Basket Strainer (FT) offers greater temperature resistance and chemical compatibility than traditional iron, steel, and bronze strainers.
PRODUCT DOWNLOADS 
Our best seller! The compact model 750 series delivers big flow for little power. Great for smaller and simple ponds (3,000 gallons or less). The motor is totally enclosed fan-cooled for durability.- 115V only Supplied with an 8-foot cord set
- Assembled in the USA
- Five-year limited warranty
PRODUCT DOWNLOADS: SEQUENCE 750 DATA SHEETS SEQUENCE 750 INSTALLATION MANUAL SEQUENCE PRODUCT BROCHURE
The Classic! The model 1000 series has set the standard by which all others are measured. This series is a perfect blend of medium pressure and ample flow for the majority of ponds. The motor is totally enclosed, fan-cooled for durability.- 115V or 230V Supplied with an 8-foot, 115V cord set
- Assembled in the USA
- Five-year limited warranty
PRODUCT DOWNLOADS: SEQUENCE 1000 DATA SHEETS SEQUENCE 1000 INSTALLATION MANUAL SEQUENCE PRODUCT BROCHURE
Introducing the new Sequence 4000. The new expansive design meets today’s increased market demand for performance on all levels. Every Sequence 4000 model is supplied complete with 2” FNPT and buttress thread ports and unions for ease of use.- Supplied with an 8-foot, 115V cord set
- Made in the USA
- Five-year limited warranty
PRODUCT DOWNLOADS: SEQUENCE 4000 DATA SHEETS SEQUENCE 4000 INSTALLATION MANUAL SEQUENCE PRODUCT BROCHURE
Equipped for massive flow and applications that demand high performance, we offer the Sequence Power Series with abundant flow and pressure. Five-year limited warranty.
PRODUCT DOWNLOADS: SEQUENCE POWER 1000 DATA SHEETS SEQUENCE POWER 1000 INSTALLATION MANUAL SEQUENCE PRODUCT BROCHURE
To support recirculation applications requiring flow rates above 8000 GPH at high head pressures, we’ve taken all the great things from the tried and true Sequence Power 1000 series and expanded them to the 4000 series. Achieving over 13,000 GPH and a max of 80 feet of head, the 4000 broadens the performance range in the Sequence Power series. Inlet and discharge ports are both increased to 2” with an inner diameter connection of FNPT, and outer diameter buttress threads for union adaptors, field installations become less burdened; eliminating reducer-fitting and adapter-assembly costs and reducing friction losses in pump systems. Five-year limited warranty.
PRODUCT DOWNLOADS: SEQUENCE POWER 4000 DATA SHEETS SEQUENCE POWER 4000 INSTALLATION MANUAL SEQUENCE PRODUCT BROCHURE
As large water features and high turnover requirements continue to gain popularity, the cost of energy does not! Introducing the Sequence Titan series: Imagine 12,000 GPH for less than 845 watts! The highest efficiency pumps available for water garden applications – where you need them most, in high flow! With flow rates between 3,000 and 12,000 GPH and head capabilities between 21 and 47 feet, the Sequence Titan series is sure to cover most large-scale water feature requirements. Sequence Titan. 12000SEQ21 and 18000SEQ45 are available in 115V or 230V. 12000SEQ21 Supplied with 115V or 230V cord set. Made in the USA. Five-year limited warranty.
PRODUCT DOWNLOADS: SEQUENCE TITAN DATA SHEETS SEQUENCE TITAN INSTALLATION MANUAL SEQUENCE PRODUCT BROCHURE
The Alpha Primer series integrates a basket-type pre-filter and self-priming capabilities into one efficient package for trouble-free operation. The motor is totally enclosed, fan-cooled for durability 115V or 230V with an 8-foot cord set. Five-year limited warranty. Special features include an internal diffuser to allow for the displacement of trapped air. This type of pump will continue to move water even when there is some air in the line. The integrated strainer basket on all primer units helps protect the internal rotating parts of the pump from damage due to external debris being pulled into the pump. The simple cover allows for quick cleaning.
PRODUCT DOWNLOADS: SEQUENCE ALPHA PRIMER DATA SHEETS SEQUENCE ALPHA PRIMER INSTALLATION MANUAL SEQUENCE PRODUCT BROCHURE
As new Recirculating Aquaculture Systems continue to reduce wasteful energy requirements like high pressure, the QSYS® modular axial flow pump technology will meet the demands of intensive high-flow low-head culture systems. QSYS® is truly a disruptive technology that will enable efficient and sustainable aquaculture for generations to come. • Up to 600 GPM • Up to 10’ shutoff • Performances at 2HP and less • Modular design allows for easy manifolding/redundancy • Seal-less Design provides low maintenance costs
PRODUCT DOWNLOADS QSYS Cutsheet
The C•Shell 6x5-11 pump body is suitable for Chemical Process Industry (CPI) applications requiring Total Dynamic Head of up to 160 feet and Flow of up to 160 feet and 2400 gallons per minute (US). The inlet is a 6” ANSI RF150 configuration on a compact close-coupled bracket. The total height for the pump body is 21.94”. Use of NEMA JM motors offer a 50 to 75% space reduction compared to common ASME/ANSI style frame-mounted pumps while maintaining benefits of a centerline discharge.
PRODUCT DOWNLOADS C•SHELL 6X5 GENERAL ASSEMBLY MANUAL C•SHELL COMMISSIONING AND OPERATIONS MANUAL
The C•Shell 4x3-10 pump body is suitable for Chemical Process Industry (CPI) applications requiring Total Dynamic Head of up to 125 feet and Flow of up to 1000 gallons per minute (US). The inlet is a 4” ANSI Class 150 RF Flange on a compact close-coupled bracket. The total height of the pump body is 18.5”. Use of NEMA JM motors offer a 50 to 75% space reduction compared to common ASME/ANSI style frame-mounted pumps while maintaining benefits of a centerline discharge.
PRODUCT DOWNLOADS C•SHELL 4X3 GENERAL ASSEMBLY MANUAL C•SHELL COMMISSIONING AND OPERATIONS MANUAL
The compact ValuFlo® 750 series delivers big flow for little power. Great for smaller and simple ponds (3,000 gallons or less). The motor is totally-enclosed fan-cooled for durability. 115V only. 18 month limited warranty. Supplied with an 8-foot cord set. Made in the USA.
PRODUCT DOWNLOADS: VALUFLO 750 DATA SHEET VALUFLO 750 INSTALLATION MANUAL VALUFLO PRODUCT BROCHURE 
The conventional and simple seal design allows for a wide range of different seal face materials to be configured for the appropriate pumped fluid. The seal chamber design provides for easy and fast installation.
PRODUCT DOWNLOADS C•SHELL PRODUCT BROCHURE
The C•Shell 3x2-10 pump body is suitable for Chemical Process Industry (CPI) applications requiring Total Dynamic Head of up to 220 feet and Flow of up to 700 gallons per minute (US). The inlet is a 3” ANSI RF150 configuration on a compact close-coupled bracket. The total height for the pump body is 17.75”. Use of NEMA JM motors offer a 50 to 75% space reduction compared to common ASME/ANSI style frame-mounted pumps while maintaining benefits of a centerline discharge.
PRODUCT DOWNLOADS C•SHELL PRODUCT BROCHURE C•SHELL 3X2 GENERAL ASSEMBLY MANUAL C•SHELL COMMISSIONING AND OPERATIONS MANUAL
A unique, patented design in mechanical seals is available from Advance. The Impenatra seal is a radically new approach to solve many shaft sealing problems. When used with the Advance line of pumps, it isolates all metallic parts from contact with the fluid. Alternately, corrosive chemicals require seals made of exotic alloys. The high prices and long lead times are objectionable. The Impenatra seal offers a solution to both problems.
PRODUCT DOWNLOADS IMPENATRA SEAL DATASHEET IMPENATRA SEAL CORROSION RESISTANCE CHART IMPENATRA SEAL INSTALLATION MANUAL ADVANCE PRODUCT BROCHURE
The Advance 4000 is a close-coupled, end suction centrifugal pump line which is molded in glass-filled polypropylene. Its high-efficiency design makes it suitable for medium flows [to 200 GPM] and higher heads [up to 80’ TDH]. When fitted with the patented Impenatra® Seal, the Advance 4000 provides total non-metallic contact, while maintaining the benefits of a direct drive unit. The design of the pump, coupled with the chosen resins, produces a strong, durable, versatile unit. When used with the patented Impenatra® seal, the fluid pumped does not contact any metal parts. This allows it to properly handle many corrosive and chemical applications.
PRODUCT DOWNLOADS ADVANCE PRODUCT BROCHURE ADVANCE 4000 DIMENSIONAL DRAWINGS ADVANCE 4000 DATA SHEETS (60 HZ) ADVANCE 4000 INSTALLATION MANUAL ADVANCE COMMISSIONING AND OPERATIONS MANUAL ADVANCE CHEMICAL RESISTANCE CHART
The Advance 3000 is a close coupled, end suction centrifugal pump line which is molded in Noryl®. Its high-efficiency design makes it suitable for medium flows [to 60 GPM] and higher heads [up to 160’TDH]. When fitted with the patented Impenatra® Seal, the Advance 3000 provides total non-metallic contact, while maintaining the benefits of a direct drive unit. Flows up to 60 GPM and head pressures up to 67 PSI. The Advance 3000 is molded out of high-quality glass-filled Noryl®, which gives it many advantages. It has good resistance to most acids, alkalis, and inorganics. Noryl® has excellent tensile strength, very low water absorption, and a continuous temperature rating of 194° F.
PRODUCT DOWNLOADS: ADVANCE PRODUCT BROCHURE ADVANCE 3000 DIMENSIONAL DRAWINGS ADVANCE 3000 DATA SHEETS (60 HZ) ADVANCE 3000 INSTALLATION MANUAL ADVANCE COMMISSIONING AND OPERATIONS MANUAL ADVANCE CHEMICAL RESISTANCE CHART
The Advance 1000 is molded out of high-quality glass-filled Noryl®, which gives it many advantages. It has good resistance to most acids, alkalis, and inorganics. Noryl® has excellent tensile strength, very low water absorption, and a continuous temperature rating of 194° F. We also offer the Advance 1000 line in polypropylene. The design of the pump, coupled with the chosen resins, produces a strong, durable, versatile unit. When used with the patented Impenatra® seal, the fluid pumped does not contact any metal parts. This allows it to properly handle many corrosive and chemical applications at a fraction of the cost of exotic alloys.
PRODUCT DOWNLOADS: ADVANCE PRODUCT BROCHURE ADVANCE 1000 DIMENSIONAL DRAWINGS ADVANCE 1000 DATA SHEETS (60 HZ) ADVANCE 1000 INSTALLATION MANUAL ADVANCE COMMISSIONING AND OPERATIONS MANUAL ADVANCE CHEMICAL RESISTANCE CHART
The Impenatra II Seal is an innovative new approach to solve many shaft sealing problems. When used in the GENESYS® 3x2-6, it isolates all metallic parts from contact with the fluid. Alternately, corrosive chemicals require seals made of exotic alloys. You can expect excellent corrosion resistance and protection from attack by contained fluid and the surrounding environment. Easy to install and field adjustment not required. It offers great versatility at an excellent price. Reliability due to the simplicity of design and quality components.
PRODUCT DOWNLOADS: IMPENATRA II SEAL DATASHEET GENESYS PRODUCT BROCHURE 
The GENESYS® 4x3-9 vinyl ester and polyester end-suction centrifugal pump line is designed and engineered to provide highly efficient pumping solutions. The fiberglass reinforced polymer case construction with the option of no wetted metal parts gives it compatibility with many aggressive chemistries and corrosive fluids. The unique enclosed-impeller and time-tested volute design render 1800 RPM performances at 84% efficiency.- 560 GPM at BEP
- 88’ Head Shut-Off
- Peak Efficiency 84%
- ANSI/ASME - B73lean
- Highly Corrosion Resistant Proprietary FRP Formulation
PRODUCT DOWNLOADS: GENESYS® 4X3-9 DATA SHEET (60HZ, IMPERIAL) GENESYS® 4X3-9 DATA SHEET (50HZ, METRIC) GENESYS® 4X3-9 INSTALLATION & SERVICE MANUAL
After years of rigorous research and development, the proven B73lean® design of the Genesys 3x2-6 model is lowering total cost of ownership from basic applications to more technologically advanced facilities around the globe. The Genesys non-metallic, end-suction centrifugal pump line is designed and engineered for highly efficient pumping solutions.
PRODUCT DOWNLOADS: GENESYS 3X2-6 DATA SHEETS (60HZ, IMPERIAL) GENESYS 3X2-6 DATA SHEETS (50HZ, METRIC) GENESYS 3X2-6 DIMENSIONAL DRAWINGS GENESYS 3X2-6 INSTALLATION MANUAL GENESYS COMMISSIONING AND OPERATIONS MANUAL
The ValuFlo® 1000 series has set the standard by which all others are measured. The perfect blend of medium pressure and ample flow for the majority of ponds. The motor is totally enclosed, fan-cooled for durability. 115V or 230V. 18 month limited warranty. Supplied with an 8-foot, 115V cord set. Made in the USA.
PRODUCT DOWNLOADS: VALUFLO 1000 DATA SHEETS VALUFLO 1000 INSTALLATION MANUAL VALUFLO PRODUCT BROCHURE 
Our light duty WW model strainers are sold with either a 1.5” or 2” union adapter. All units come complete with an internal strainer assembly and gasket seals. WW model strainers are designed, engineered, and produced in the USA.
PRODUCT DOWNLOADS: SEQUENCE BASKET STRAINER (WW) PARTS SHEET SEQUENCE PRODUCT BROCHURE- Our medium-duty PF model strainers have a clear or gray PVC body and a basket made of stainless steel or acrylonitrile butadiene styrene (ABS). The standard port dimension is a 2” male thread that comes with adaptors that have a slip port. You can expect higher quality molding processing, finer materials, and excellent performance.
PRODUCT DOWNLOADS: SEQUENCE BASKET STRAINER (PF) PARTS SHEET SEQUENCE PRODUCT BROCHURE -
Our heavy-duty FT model strainer is suitable for aquatics, general water, and industrial applications. The standard strainer features a unique seamless cast design that can be customized for Sequence® Titan pump applications requiring integral access ports and FTP stands. The Sequence® FT basket strainer is available in corrosion-resistant plastics such as PVC, CPC, PP, and PVDF, as well as fiberglass. With the FT, you can expect greater temperature resistance and chemical compatibility than traditional iron, steel, and bronze strainers.
PRODUCT DOWNLOADS: SEQUENCE BASKET STRAINER (FT) PARTS SHEET SEQUENCE PRODUCT BROCHURE - We offer three different sizes of swing check valves (1.5” to 3”) for applications with potential flow reversal. All units are made from 100% PVC with a rubber sealed flapper swing valve.
PRODUCT DOWNLOADS: SEQUENCE SWING CHECK VALVE DATA SHEET SEQUENCE PRODUCT BROCHURE
