PRODUCT DOWNLOADS:
SEQUENCE TITAN DATA SHEETS SEQUENCE TITAN INSTALLATION MANUAL SEQUENCE PRODUCT BROCHURE
As large water features and high turnover requirements continue to gain popularity, the cost of energy does not! Introducing the Sequence Titan series: Imagine 12,000 GPH for less than 845 watts! The highest efficiency pumps available for water garden applications – where you need them most, in high flow! With flow rates between 3,000 and 12,000 GPH and head capabilities between 21 and 47 feet, the Sequence Titan series is sure to cover most large-scale water feature requirements. Sequence Titan. 12000SEQ21 and 18000SEQ45 are available in 115V or 230V. 12000SEQ21 Supplied with 115V or 230V cord set. Made in the USA. Five-year limited warranty.
PRODUCT DOWNLOADS: SEQUENCE TITAN DATA SHEETS SEQUENCE TITAN INSTALLATION MANUAL SEQUENCE PRODUCT BROCHURE
After years of rigorous research and development, the proven B73lean® design of the Genesys 3x2-6 model is lowering total cost of ownership from basic applications to more technologically advanced facilities around the globe. The Genesys non-metallic, end-suction centrifugal pump line is designed and engineered for highly efficient pumping solutions.
PRODUCT DOWNLOADS: GENESYS 3X2-6 DATA SHEETS (60HZ, IMPERIAL) GENESYS 3X2-6 DATA SHEETS (50HZ, METRIC) GENESYS 3X2-6 DIMENSIONAL DRAWINGS GENESYS 3X2-6 INSTALLATION MANUAL GENESYS COMMISSIONING AND OPERATIONS MANUAL
The GENESYS® 4x3-9 vinyl ester and polyester end-suction centrifugal pump line is designed and engineered to provide highly efficient pumping solutions. The fiberglass reinforced polymer case construction with the option of no wetted metal parts gives it compatibility with many aggressive chemistries and corrosive fluids. The unique enclosed-impeller and time-tested volute design render 1800 RPM performances at 84% efficiency.- 560 GPM at BEP
- 88’ Head Shut-Off
- Peak Efficiency 84%
- ANSI/ASME - B73lean
- Highly Corrosion Resistant Proprietary FRP Formulation
PRODUCT DOWNLOADS: GENESYS® 4X3-9 DATA SHEET (60HZ, IMPERIAL) GENESYS® 4X3-9 DATA SHEET (50HZ, METRIC) GENESYS® 4X3-9 INSTALLATION & SERVICE MANUAL
The Impenatra II Seal is an innovative new approach to solve many shaft sealing problems. When used in the GENESYS® 3x2-6, it isolates all metallic parts from contact with the fluid. Alternately, corrosive chemicals require seals made of exotic alloys. You can expect excellent corrosion resistance and protection from attack by contained fluid and the surrounding environment. Easy to install and field adjustment not required. It offers great versatility at an excellent price. Reliability due to the simplicity of design and quality components.
PRODUCT DOWNLOADS: IMPENATRA II SEAL DATASHEET GENESYS PRODUCT BROCHURE 
The Advance 1000 is molded out of high-quality glass-filled Noryl®, which gives it many advantages. It has good resistance to most acids, alkalis, and inorganics. Noryl® has excellent tensile strength, very low water absorption, and a continuous temperature rating of 194° F. We also offer the Advance 1000 line in polypropylene. The design of the pump, coupled with the chosen resins, produces a strong, durable, versatile unit. When used with the patented Impenatra® seal, the fluid pumped does not contact any metal parts. This allows it to properly handle many corrosive and chemical applications at a fraction of the cost of exotic alloys.
PRODUCT DOWNLOADS: ADVANCE PRODUCT BROCHURE ADVANCE 1000 DIMENSIONAL DRAWINGS ADVANCE 1000 DATA SHEETS (60 HZ) ADVANCE 1000 INSTALLATION MANUAL ADVANCE COMMISSIONING AND OPERATIONS MANUAL ADVANCE CHEMICAL RESISTANCE CHART
The Advance 3000 is a close coupled, end suction centrifugal pump line which is molded in Noryl®. Its high-efficiency design makes it suitable for medium flows [to 60 GPM] and higher heads [up to 160’TDH]. When fitted with the patented Impenatra® Seal, the Advance 3000 provides total non-metallic contact, while maintaining the benefits of a direct drive unit. Flows up to 60 GPM and head pressures up to 67 PSI. The Advance 3000 is molded out of high-quality glass-filled Noryl®, which gives it many advantages. It has good resistance to most acids, alkalis, and inorganics. Noryl® has excellent tensile strength, very low water absorption, and a continuous temperature rating of 194° F.
PRODUCT DOWNLOADS: ADVANCE PRODUCT BROCHURE ADVANCE 3000 DIMENSIONAL DRAWINGS ADVANCE 3000 DATA SHEETS (60 HZ) ADVANCE 3000 INSTALLATION MANUAL ADVANCE COMMISSIONING AND OPERATIONS MANUAL ADVANCE CHEMICAL RESISTANCE CHART
The Advance 4000 is a close-coupled, end suction centrifugal pump line which is molded in glass-filled polypropylene. Its high-efficiency design makes it suitable for medium flows [to 200 GPM] and higher heads [up to 80’ TDH]. When fitted with the patented Impenatra® Seal, the Advance 4000 provides total non-metallic contact, while maintaining the benefits of a direct drive unit. The design of the pump, coupled with the chosen resins, produces a strong, durable, versatile unit. When used with the patented Impenatra® seal, the fluid pumped does not contact any metal parts. This allows it to properly handle many corrosive and chemical applications.
PRODUCT DOWNLOADS ADVANCE PRODUCT BROCHURE ADVANCE 4000 DIMENSIONAL DRAWINGS ADVANCE 4000 DATA SHEETS (60 HZ) ADVANCE 4000 INSTALLATION MANUAL ADVANCE COMMISSIONING AND OPERATIONS MANUAL ADVANCE CHEMICAL RESISTANCE CHART
A unique, patented design in mechanical seals is available from Advance. The Impenatra seal is a radically new approach to solve many shaft sealing problems. When used with the Advance line of pumps, it isolates all metallic parts from contact with the fluid. Alternately, corrosive chemicals require seals made of exotic alloys. The high prices and long lead times are objectionable. The Impenatra seal offers a solution to both problems.
PRODUCT DOWNLOADS IMPENATRA SEAL DATASHEET IMPENATRA SEAL CORROSION RESISTANCE CHART IMPENATRA SEAL INSTALLATION MANUAL ADVANCE PRODUCT BROCHURE
The C•Shell 3x2-10 pump body is suitable for Chemical Process Industry (CPI) applications requiring Total Dynamic Head of up to 220 feet and Flow of up to 700 gallons per minute (US). The inlet is a 3” ANSI RF150 configuration on a compact close-coupled bracket. The total height for the pump body is 17.75”. Use of NEMA JM motors offer a 50 to 75% space reduction compared to common ASME/ANSI style frame-mounted pumps while maintaining benefits of a centerline discharge.
PRODUCT DOWNLOADS C•SHELL PRODUCT BROCHURE C•SHELL 3X2 GENERAL ASSEMBLY MANUAL C•SHELL COMMISSIONING AND OPERATIONS MANUAL
The conventional and simple seal design allows for a wide range of different seal face materials to be configured for the appropriate pumped fluid. The seal chamber design provides for easy and fast installation.
PRODUCT DOWNLOADS C•SHELL PRODUCT BROCHURE
The C•Shell 4x3-10 pump body is suitable for Chemical Process Industry (CPI) applications requiring Total Dynamic Head of up to 125 feet and Flow of up to 1000 gallons per minute (US). The inlet is a 4” ANSI Class 150 RF Flange on a compact close-coupled bracket. The total height of the pump body is 18.5”. Use of NEMA JM motors offer a 50 to 75% space reduction compared to common ASME/ANSI style frame-mounted pumps while maintaining benefits of a centerline discharge.
PRODUCT DOWNLOADS C•SHELL 4X3 GENERAL ASSEMBLY MANUAL C•SHELL COMMISSIONING AND OPERATIONS MANUAL
The C•Shell 6x5-11 pump body is suitable for Chemical Process Industry (CPI) applications requiring Total Dynamic Head of up to 160 feet and Flow of up to 160 feet and 2400 gallons per minute (US). The inlet is a 6” ANSI RF150 configuration on a compact close-coupled bracket. The total height for the pump body is 21.94”. Use of NEMA JM motors offer a 50 to 75% space reduction compared to common ASME/ANSI style frame-mounted pumps while maintaining benefits of a centerline discharge.
PRODUCT DOWNLOADS C•SHELL 6X5 GENERAL ASSEMBLY MANUAL C•SHELL COMMISSIONING AND OPERATIONS MANUAL
