Shop | Page 2 of 3

Genesys^® 4×3-9 Pump

The GENESYS® 4x3-9 vinyl ester and polyester end-suction centrifugal pump line is designed and engineered to provide highly efficient pumping solutions. The fiberglass reinforced polymer case construction with the option of no wetted metal parts gives it compatibility with many aggressive chemistries and corrosive fluids. The unique enclosed-impeller and time-tested volute design render 1800 RPM performances at 84% efficiency.

560 GPM at BEP
88’ Head Shut-Off
Peak Efficiency 84%
ANSI/ASME - B73lean
Highly Corrosion Resistant Proprietary FRP Formulation

Request A Quote

PRODUCT DOWNLOADS:

GENESYS® 4X3-9 DATA SHEET (60HZ, IMPERIAL)

GENESYS® 4X3-9 DATA SHEET (50HZ, METRIC)

GENESYS® 4X3-9 INSTALLATION & SERVICE MANUAL

Details

Genesys^® Impenatra^® II Seal

The Impenatra II Seal is an innovative new approach to solve many shaft sealing problems. When used in the GENESYS^® 3x2-6, it isolates all metallic parts from contact with the fluid. Alternately, corrosive chemicals require seals made of exotic alloys. You can expect excellent corrosion resistance and protection from attack by contained fluid and the surrounding environment. Easy to install and field adjustment not required. It offers great versatility at an excellent price. Reliability due to the simplicity of design and quality components.

PRODUCT DOWNLOADS:

IMPENATRA II SEAL DATASHEET

GENESYS PRODUCT BROCHURE

REQUEST A QUOTE

Details

Advance 1000 Pump

The Advance 1000 is molded out of high-quality glass-filled Noryl®, which gives it many advantages. It has good resistance to most acids, alkalis, and inorganics. Noryl® has excellent tensile strength, very low water absorption, and a continuous temperature rating of 194° F. We also offer the Advance 1000 line in polypropylene. The design of the pump, coupled with the chosen resins, produces a strong, durable, versatile unit. When used with the patented Impenatra® seal, the fluid pumped does not contact any metal parts. This allows it to properly handle many corrosive and chemical applications at a fraction of the cost of exotic alloys.

Request A Quote

PRODUCT DOWNLOADS:

ADVANCE PRODUCT BROCHURE

ADVANCE 1000 DIMENSIONAL DRAWINGS

ADVANCE 1000 DATA SHEETS (60 HZ)

ADVANCE 1000 INSTALLATION MANUAL

ADVANCE COMMISSIONING AND OPERATIONS MANUAL

ADVANCE CHEMICAL RESISTANCE CHART

Details

Advance 3000 Pump

The Advance 3000 is a close coupled, end suction centrifugal pump line which is molded in Noryl®. Its high-efficiency design makes it suitable for medium flows [to 60 GPM] and higher heads [up to 160’TDH]. When fitted with the patented Impenatra® Seal, the Advance 3000 provides total non-metallic contact, while maintaining the benefits of a direct drive unit. Flows up to 60 GPM and head pressures up to 67 PSI. The Advance 3000 is molded out of high-quality glass-filled Noryl®, which gives it many advantages. It has good resistance to most acids, alkalis, and inorganics. Noryl® has excellent tensile strength, very low water absorption, and a continuous temperature rating of 194° F.

Request A Quote

PRODUCT DOWNLOADS:

ADVANCE PRODUCT BROCHURE

ADVANCE 3000 DIMENSIONAL DRAWINGS

ADVANCE 3000 DATA SHEETS (60 HZ)

ADVANCE 3000 INSTALLATION MANUAL

ADVANCE COMMISSIONING AND OPERATIONS MANUAL

ADVANCE CHEMICAL RESISTANCE CHART

Details

Advance 4000 Pump

The Advance 4000 is a close-coupled, end suction centrifugal pump line which is molded in glass-filled polypropylene. Its high-efficiency design makes it suitable for medium flows [to 200 GPM] and higher heads [up to 80’ TDH]. When fitted with the patented Impenatra® Seal, the Advance 4000 provides total non-metallic contact, while maintaining the benefits of a direct drive unit. The design of the pump, coupled with the chosen resins, produces a strong, durable, versatile unit. When used with the patented Impenatra® seal, the fluid pumped does not contact any metal parts. This allows it to properly handle many corrosive and chemical applications.

Request A Quote

PRODUCT DOWNLOADS

ADVANCE PRODUCT BROCHURE

ADVANCE 4000 DIMENSIONAL DRAWINGS

ADVANCE 4000 DATA SHEETS (60 HZ)

ADVANCE 4000 INSTALLATION MANUAL

ADVANCE COMMISSIONING AND OPERATIONS MANUAL

ADVANCE CHEMICAL RESISTANCE CHART

Details

Advance Impenatra^® Seal

A unique, patented design in mechanical seals is available from Advance. The Impenatra seal is a radically new approach to solve many shaft sealing problems. When used with the Advance line of pumps, it isolates all metallic parts from contact with the fluid. Alternately, corrosive chemicals require seals made of exotic alloys. The high prices and long lead times are objectionable. The Impenatra seal offers a solution to both problems.

PRODUCT DOWNLOADS

IMPENATRA SEAL DATASHEET

IMPENATRA SEAL CORROSION RESISTANCE CHART

IMPENATRA SEAL INSTALLATION MANUAL

ADVANCE PRODUCT BROCHURE

Request A Quote

Details

C•Shell^® 3X2-10 Pump

The C•Shell 3x2-10 pump body is suitable for Chemical Process Industry (CPI) applications requiring Total Dynamic Head of up to 220 feet and Flow of up to 700 gallons per minute (US). The inlet is a 3” ANSI RF150 configuration on a compact close-coupled bracket. The total height for the pump body is 17.75”. Use of NEMA JM motors offer a 50 to 75% space reduction compared to common ASME/ANSI style frame-mounted pumps while maintaining benefits of a centerline discharge.

Request A Quote

PRODUCT DOWNLOADS

C•SHELL PRODUCT BROCHURE

C•SHELL 3X2 GENERAL ASSEMBLY MANUAL

C•SHELL COMMISSIONING AND OPERATIONS MANUAL

Details

C•Shell^® Type-21 Component Seal

The conventional and simple seal design allows for a wide range of different seal face materials to be configured for the appropriate pumped fluid. The seal chamber design provides for easy and fast installation.

Request A Quote

PRODUCT DOWNLOADS

C•SHELL PRODUCT BROCHURE

Details

C•Shell^® 4X3-10 Pump

The C•Shell 4x3-10 pump body is suitable for Chemical Process Industry (CPI) applications requiring Total Dynamic Head of up to 125 feet and Flow of up to 1000 gallons per minute (US). The inlet is a 4” ANSI Class 150 RF Flange on a compact close-coupled bracket. The total height of the pump body is 18.5”. Use of NEMA JM motors offer a 50 to 75% space reduction compared to common ASME/ANSI style frame-mounted pumps while maintaining benefits of a centerline discharge.

Request A Quote

PRODUCT DOWNLOADS

C•SHELL PRODUCT BROCHURE

C•SHELL 4X3 GENERAL ASSEMBLY MANUAL

C•SHELL COMMISSIONING AND OPERATIONS MANUAL

Details

C•Shell^® 6X5-11 Pump

The C•Shell 6x5-11 pump body is suitable for Chemical Process Industry (CPI) applications requiring Total Dynamic Head of up to 160 feet and Flow of up to 160 feet and 2400 gallons per minute (US). The inlet is a 6” ANSI RF150 configuration on a compact close-coupled bracket. The total height for the pump body is 21.94”. Use of NEMA JM motors offer a 50 to 75% space reduction compared to common ASME/ANSI style frame-mounted pumps while maintaining benefits of a centerline discharge.

Request A Quote

PRODUCT DOWNLOADS

C•SHELL PRODUCT BROCHURE

C•SHELL 6X5 GENERAL ASSEMBLY MANUAL

C•SHELL COMMISSIONING AND OPERATIONS MANUAL

Details

QSYS™ Pump System

As new Recirculating Aquaculture Systems continue to reduce wasteful energy requirements like high pressure, the QSYS^® modular axial flow pump technology will meet the demands of intensive high-flow low-head culture systems. QSYS^® is truly a disruptive technology that will enable efficient and sustainable aquaculture for generations to come. • Up to 600 GPM • Up to 10’ shutoff • Performances at 2HP and less • Modular design allows for easy manifolding/redundancy • Seal-less Design provides low maintenance costs

Request More Info

PRODUCT DOWNLOADS

QSYS Cutsheet

Details

MDM Pumps Strainer Basket and Priming Pot

Sequence^® Basket Strainer (FT)

$4,267.70

Our heavy-duty FT model strainer is suitable for aquatics, general water, and industrial applications. The standard strainer features a unique seamless cast design that can be customized for Sequence^® Titan pump applications requiring integral access ports and FTP stands. The Sequence^® FT basket strainer is available in corrosion-resistant plastics such as PVC, CPC, PP, and PVDF, as well as fiberglass. With the FT, you can expect greater temperature resistance and chemical compatibility than traditional iron, steel, and bronze strainers.

PRODUCT DOWNLOADS:

SEQUENCE BASKET STRAINER (FT) PARTS SHEET

SEQUENCE PRODUCT BROCHURE

Select options Details