Advance 3000 Pump

Description

DESIGN
The Advance 3000 is a close-coupled, end suction centrifugal pump line which is molded in Noryl®. Its high-efficiency design makes it suitable for medium flows [to 60 GPM] and higher heads [up to 160’TDH]. When fitted with the patented Impenatra® Seal, the Advance 3000 provides total non-metallic contact, while maintaining the benefits of a direct drive unit. Flows up to 60 GPM and head pressures up to 67 PSI. The Advance 3000 is molded out of high-quality glass-filled Noryl®, which gives it many advantages. It has good resistance to most acids, alkalis, and inorganics. Noryl® has excellent tensile strength, very low water absorption, and a continuous temperature rating of 194° F.

APPLICATIONS
Typical applications serviced by the Advance 3000 include transfer of chemical process fluids, filtration systems, deionized water transfer, wastewater reclamation, pressure spray systems, fountains, plating chemical transfer and recirculation, fume scrubbers, and pollution control equipment.

CORROSION RESISTANCE:
Here is a small sampling of the chemicals handled:
• Sodium Hydroxide (10%) • Ammonium Hydroxide (10%) • Sodium Bicarbonate (SAT.) • Ammonium Phosphate (SAT.) • Potassium Bicarbonate (SAT.) • Demineralized Water • Ferric Chloride (SAT.) • Ethylene Glycol • Acetic Acid (10%) • Nitric Acid (10%) • Hydrochloric Acid (10%, 37%) • Sulphuric Acid (10%, 60%) • Nickel Plating Solutions

PERFORMANCE
Engineered for high efficiency, Advance impellers are enclosed to accommodate a wide variety of pressures and fluids. The standard impeller trims deliver the performances listed at 60 HZ. [3450 RPM]. Contact factory for 50Hz performances.

VERSATILITY
The pump can be close-coupled to a 56J motor or mounted to a bearing pedestal. Both single and three-phase motors in ODP and TEFC enclosures are readily available. An adapter kit is available to convert to a 56C flange. A variety of elastomers, seals, impellers, and motors, can be combined to meet your exact requirements. All units are bench tested prior to shipping.

MARKETING
We are structured to sell unassembled pump ends, as well as completely assembled pump and motor units. We specialize in serving OEM’s and distributors throughout the world.